GREEN_LONG.pngGREEN_SQUARE.pngCHROMEM.jpgSIGMA4.jpg

SIGMA 4 CHROME M 

FRONT LOADER

BOOM SECTION
For the Chrome series, the section of the boom is formed by an integral metal plate in the outer area and a C profile in the inner area, an ideal solution in terms of great strength and overall lightness.

Front loader with mechanical implement self-levelling system
  • Fitting brackets supporting loader from tractor front end to rear axle shafts.
  • Hydraulic system conforming to tractor specifications.

STANDARD EQUIPMENT

  • Two double acting cylinders for lifting
  • Two double acting cylinders for the operation of the implement
  • Quick-release of loader from tractor VELOTAK
  • Implement quick release EURO
  • Hydraulic quick-fit couplings
  • Adjustable support legs
  • Bucket level gauge

SIGMA 4 CHROME F

FRONT LOADER

CHROMEF.jpg

BOOM SECTION
For the Chrome series, the section of the boom is formed by an integral metal plate in the outer area and a C profile in the inner area, an ideal solution in terms of great strength and overall lightness.

Front loader with manual implement levelling

  • Fitting brackets supporting loader from tractor front end to rear axle shafts.
  • Hydraulic system conforming to tractor specifications.

STANDARD EQUIPMENT

  • Two double acting cylinders for lifting
  • Two double acting cylinders for the operation of the implement
  • Quick-release of loader from tractor VELOTAK
  • Implement quick release EURO
  • Hydraulic quick-fit couplings
  • Adjustable support legs

SIGMA 4 IRON M

FRONT LOADER

IRONM.jpg

HYDRAULIC PIPES
By replacing the iron pipes with flexible pipes, it has been possible to partially integrate the hydraulics on the inside of the boom, thus providing enhanced protection, better visibility and reduced dirt accumulation. A rugged sheath covering the pipes is also supplied, both for looks and safety.

BOOM SECTION
For the IRON series, the section of the boom is formed by an integral metal plate in the outer area and a C profile in the inner area, an ideal solution in terms of great strength and overall lightness.

Front loader with mechanical implement self-levelling system

  • Fitting brackets supporting loader from tractor front end to rear axle shafts.
  • Hydraulic system conforming to tractor specifications.

STANDARD EQUIPMENT

  • Two double acting cylinders for lifting
  • Two double acting cylinders for the operation of the implement
  • Quick-release of loader from tractor VELOTAK
  • Implement quick release EURO
  • Hydraulic quick-fit couplings
  • Adjustable support legs
  • Bucket level gauge

CHROME SERIES

IRON SERIES

SIGMA 4 IRON M

FRONT LOADER

IRONM.jpg

HYDRAULIC PIPES
By replacing the iron pipes with flexible pipes, it has been possible to partially integrate the hydraulics on the inside of the boom, thus providing enhanced protection, better visibility and reduced dirt accumulation. A rugged sheath covering the pipes is also supplied, both for looks and safety.

BOOM SECTION
For the IRON series, the section of the boom is formed by an integral metal plate in the outer area and a C profile in the inner area, an ideal solution in terms of great strength and overall lightness.

Front loader with manual implement levelling

  • Fitting brackets supporting loader from tractor front end to rear axle shafts.
  • Hydraulic system conforming to tractor specifications.

STANDARD EQUIPMENT

  • Two double acting cylinders for lifting
  • Two double acting cylinders for the operation of the implement
  • Quick-release of loader from tractor VELOTAK
  • Implement quick release EURO
  • Hydraulic quick-fit couplings
  • Adjustable support legs
  • Bucket level gauge

SIGMA 4 IRON H

FRONT LOADER

IRONH.jpg

HYDRAULIC PIPES
By replacing the iron pipes with flexible pipes, it has been possible to partially integrate the hydraulics on the inside of the boom, thus providing enhanced protection, better visibility and reduced dirt accumulation. A rugged sheath covering the pipes is also supplied, both for looks and safety.

BOOM SECTION
For the IRON series, the section of the boom is formed by an integral metal plate in the outer area and a C profile in the inner area, an ideal solution in terms of great strength and overall lightness.

Front loader with hydraulic implement self-levelling system

  • Fitting brackets supporting loader from tractor front end to rear axle shafts.
  • Hydraulic system conforming to tractor specifications.

STANDARD EQUIPMENT

  • Two double acting cylinders for lifting
  • Two double acting cylinders for the operation of the implement designed with double rod for faster implement unloading
  • Quick-release of loader from tractor VELOTAK
  • Implement quick release EURO
  • Hydraulic quick-fit couplings
  • Adjustable support legs
  • Bucket level gauge

SIGMA 4 LOADERS

For more about Sigma 4 Loaders please visit their website - Sigma4.it

or call us on 01323 833441