CHARLES J. MARSHALL
MACHINERY RANGE

FOR PRICES ON ANY OF THESE PRODUCTS CONTACT NICK ATKINSON 07733880489

Marshall Drop-Side Steel Trailers

Marshall's popular drop side trailer range is well represented throughout the country and the versatility of the removable sides enables almost any task to be carried out. Over the years Marshall have developed each model to best suit its likely environment. For example, the S/2 has been styled with a unique light weight but never-the-less robust chassis to fulfil their duties in a more recreational role at say an exclusive golf resort or a large dwelling house. The same painstaking attention to detail has been taken with the rest of our range from the S/4 to S/10, with all the models having their final destination and potential use taken into account in their design.

S/2

The Marshall S2 drop side tipping trailer  
 
Body 8' x 5' x 15"
Tyres 10.0 x 12-10 ply - 50mm 5 stud axle  
Oversize Wide Tyres 26 x 12.00 x 12 

S/4

Marshall S4 drop side tipping trailer  
   
Body 10' x 6' x 18"                                    
Tyres 10.0 x 15-10 ply - 60mm 6 stud axle
 
 

S/5

The Marshall S5 drop side tipping trailer.  
Basic
Grain Sides
Silage Side
 
Tapered Body 10'6" x 6'9"-7'x21"
Tyres 11.5 x 15-10 ply - 70mm 6 stud axle

S/6

The Marshall S6 Drop side tipping trailer.  
 
Tapered Body 12' x 6' 9" - 7' x 21"
Tyres 12.5 x 15-14 ply - 70mm 6 stud axle
 

S/85

The S85 Marshall drop side tipping trailer.  
 
Tapered Body 14' x 7' 6" - 7' 9" x 24"
Tyres 11.5 x 15-10 ply - 70mm 6 stud axle
Tandem Axles

S/10

Marshall S10 drop side 10.5 tonne tipping trailer  
 

Tapered Body 16' x 7' 6" - 
7' 9" - 24"

Tyres 385-65 x 22.5 - 80mm 8 stud axle
Tandem Axles
Before you buy compare these points

  • Large cubic capacity (enabling the user to not only carry the stated weight but to hold it as well)

  • Fixed headboard (ensures a rigid body)

  • Fully braced hinge points (eliminates cracking of material)

  • Hydraulic brakes and lights standard (S/4 upwards fulfils both HSE and highway regulations)

  • Tapered bodies (S/5 upwards ensures safe efficient discharge of all load)

  • Full height grain doors (enables large bulky loads to be discharged)

  • Flat floors (no open pressed sections that allow water to prematurely rust out joints)

  • S/5 to S/10 have full in line and side loading silage panels as standard with silage kit

  • All tandem axle models available with springs or split oscillating suspension - with no price difference

  • All Marshall silage trailers use our unique hydraulic catches which fit to the rear of the trailer removing any chance of accidental damage from the side

Marshall QM Range Monocoque Trailers

Technically advanced QM Range continues to captivate the market and boasts an impressive range of standard specification. When you consider the wealth of optional extras available, you truly have a "tailor made" trailer to fulfill your specific requirements.

Tailored 4 You

Marshall Trailers Tailored 4 You logo  

"Tailored 4 You".

The concept behind this model is to meet the needs of the discerning and practical customer, who strives for perfection in everything he or she does.

QM/6  

Model QM/6 
Tapered Body 12' x 7'3"-7'6" x 4'
   
Tyres 12.5 x 15-14 ply - 70mm 6 stud axle

QM/8  

Model QM/8 
Tapered Body 14' x 7'3"-7'6" x 4'
   
Tyres 11.5 x 15-12 ply - 70mm 6 stud axle
Tandem Axles

QM/11  
Model QM/11 
Tapered Body 16' x 7'9"-8' x 4'

   
Tyres 385 - 65 x 22.5
80mm 8 stud axle
Tandem Axles

QM/12  
Model QM/12 
Tapered Body 18' x 7'9"-8' x 4'

   
Tyres 385 - 65 x 22.5
80mm 8 stud axle
Tandem Axles

QM/14  
Model QM/14 
Tapered Body 21' x 7'9" -8'x 4'

   

Tyres 385 - 65 x 22.5
Solid 90mm 10 stud
Commercial 406x120 S Cam braked axle
Tandem Axles

We fit commercial 406x120 braked axles (the same as used on HGV's) to both our QM/14 & QM/16 models as standard. What does the competiton fit?


QM/16  

Model QM/16 
Tapered Body 24' x 7'9" -8'x 4'
   

Tyres 385 - 65 x 22.5      Solid 90mm 10 stud
Commercial 406x120 S Cam braked axle
Tandem Axles

We fit commercial 406x120 braked axles (the same as used on HGV's) to both our QM/14 & QM/16 models as standard. What does the competiton fit?




Before you buy compare these points


Large cubic capacity (enabling the user to not only carry the stated weight but to hold it as well)
QM/14 & QM/16 have commercial type axles, as used by road transport, fitted as standard

Flat floors (no open pressed sections that allow water to prematurely rust out joints)

Protected lights which are integrated into the back rail. (eliminates any potential damage)

Precision chrome rams (QM/11 upwards)

Unique design chassis combines unmatched strength and stability

Front inspection ladder is standard (QM/8 upwards)

All models have full in line and side loading silage panels as standard with silage kit complete with full height silage gate forming the canopy at the rear (eliminating silage catching during discharge.)

All tandem axle models available with springs or split oscillating suspension - with no price difference

All Marshall silage trailers use our unique hydraulic catches which fit to the rear of the trailer removing any chance of accidental damage from the side

The most accurate comparison when buying a trailer is the cost per cu. ft!


Marshall Rear Discharge Spreader - Vesuvius Vantage



The whole concept behind the vesuvius Vantage (Rear Discharge Spreaders) was based on the premise that a spreader was required in the marketplace that should be virtually maintenance free.  A tall order but one MARSHALL have certainly achieved!  The Vesuvius Vantage requires a daily visual check of the gearbox oil level and greasing by means of five remote points.  Quite simply that is all that is required.  Surely this is a benefit for any practical user. 

VES VANTAGE 2500 - 14 Ton

VES2500  
Standard Tyres - 18.4 x 34 - 12 ply - 90mm 10 stud Commercial 406x120 S Cam braked axle 
Optional Tyres available - 23.1 x 26 - 14 ply 
Standard with Slurry Door  


VES VANTAGE 1500 - 9 Tons

VES1500  
Standard Tyres - 18.4 x 30 - 12 ply - 80mm 8 stud axle 
Optional Tyres available - 23.1 x 26 - 14 ply 
Standard with Slurry Door  

VES VANTAGE 2000 - 12 Tons

VES2000  
Standard Tyres - 18.4 x 34 - 12 ply - 90mm 10 stud Commercial 406x120 S Cam braked axle 
Optional Tyres available - 23.1 x 26 - 12 ply 
Standard with Slurry Door  
Benefits

  • no floor chains (no problems) 
  • robust purpose built one piece gearbox (no breakages) 
  • 10mm thick step design rear beaters (long life) 
  • fully reversible hardened tips (reduces wear) 
  • hydraulic pusher ram (heart of the machine) 
  • holds and spreads slurry (liquid tight seal) 
  • compact design with axle position as far back as possible (increased traction & versatility) 
  • 520mm minimum ground clearance (VES-1500)
  • exceptional residual value (lowers cost per ton spread)

The speed of discharge is controlled by our mechanical device which reduces the oil flow as the ram moves forward enabling the operator to simply engage the spool valve prior to spreading.


Marshall Muck Spreaders

From it's initial conception over 30 years ago, this spreader was built to be the best.  The engineering used within it's entire construction has without a doubt been proven to out-perform all competition on the market.  It's round shaft is supported between two self-aligning bearings, while being protected by a series of practical outlets for the excess slurry that if allowed will destroy a bearing.  The bottom drive line input shaft is mounted with two bearings and the drive sprocket is located between them by means of a 10 pitch spline ensuring a positive and long lasting drive and this is only one of the benefits of the mechanical element of the spreader.  We take pride in our reputation for the quality of our products and the thickness of material used within the spreader body; a reputation that is guarded by ensuring all the lessons from the past are incorporated into the latest MS range ensuring our legacy for quality continues.

MS 45

MS45  

 
Standard Tyres - 10.0x15-10ply - 60mm 6 stud axle 
Oversize Tyres - 11.5x15-12ply 
   

MS 60

The Marshall MS60 side discharge dung spreader  
Standard Tyres - 12.5 x 15 - 14 ply - 70mm 6 stud 
Oversize Tyres - 400 - 60 X 22.5 

MS 75

The Marshall MS75 side discharge side spreader  
 
Standard Tyres - 385 - 65 x 22.5 - 70mm 6 stud axle 
Oversize Tyres - 400 - 60 x 22.5 

MS 90

MS90  
 
Standard Tyres - 385 - 65 x 22.5 - 70mm 6 stud axle 
Oversize Tyres - 400 - 60 x 22.5 - 70mm 6 stud axle 
  

MS 105

Marshall MS105 side discharge dung spreader  

 
Standard Tyres - 400 - 60 x 22.5 - 80mm 8 stud axle 
Oversize Tyres - 550 - 60 x 22.5 Track Tread 
   

Before you buy compare these points

  • Double case hardened flail chains (reduces wear) 
  • large 3"x2 ½" heads (ensures a fast efficient spread rate) 
  • Precision steel sprockets (not cast) located to the shafts by a 10 pitch spline 
  • All bearings are mounted away from the drum limiting potential damage from corrosive slurry 
  • Stainless steel rod used on the lid lifting ram ( eliminates corrosion) 
  • Integral design chassis (ensures no fatigue that can produce premature cracking) 
  • A round perfectly balanced main rotor shaft with chains mounted on four sides

Marshall ST Tanker

It just spreads slurry!  How many times have we heard this statement and yet this should not be your sole criterion when buying a tanker.  To evaluate the complete tanker package you need to appreciate the quality of components used and the robust construction which can add years to a tanker's life.  Take time to study the full specification details and discover why Marshall is the optimum choice in tankers.

ST1200

ST1200  

Standard Tyres385- 65 x 22.5 - 70mm 6 stud axle
Oversize tyres400 - 60 x 22.5

ST1400

ST1400  

Standard Tyres385 - 65 x 22.5 - 80mm 8 stud axle
Oversize tyres550 - 60 x 22.5

ST1600

ST1600  

Standard Tyres550- 60 x 22.5 - 80mm 8 stud axle

ST1800

ST1800  

Standard Tyres550- 60 x 22.5 - 80mm 8 stud axle

ST2000

ST2000  

Standard Tyres

28.1 x 26 - 90mm 10 stud axle   Commercial 406x120 S Cam braked axles      

 

Spring Drawbar - Standard

 

ST2300

ST2300  

Standard Tyres28.1 x 26 - 90mm 10 stud axle Commercial 406x120 S Cam braked axles
Spring Drawbar - Standard

ST2550

ST2550  

Standard Tyres28.1 x 26 - 90mm 10 stud axle Commercial 406x120 S Cam braked axles
Spring Drawbar - Standard

Before you buy compare these points

  • A quality 8000L pump. 
  • Standard 6mm steel tank (ensures a long lifespan) 
  • Standard 6" side valve (with interchangeable rear mounting position) 
  • Liquid filled 75mm gauge (allows for accurate pressure readings) 
  • Fully integrated lights 
  • Integral design chassis (ensures no fatigue that can produce premature cracking) 
  • Tanks that hold the stated capacity (even the LGP cut in tanks are increased in size to compensate for the cut out part)