TEAGLE.gif

MACHINERY

TEAGLEBANNER.jpg

TEAGLE TITAN MUCK SPREADERS
 

The TITAN range is well proportioned, ensuring excellent stability, manoeuvrability, visibility of the load, and superior ground clearance.

Large Capacity
At the top end of the Titan range are the 10 and 12 cubic metre models. Extend capacity easily with steel greedy boards.

Fine Shredding
Large diameter beaters generate a high tip speed to ensure a fine shredding action is achieved. A stepless auger with a shallow pitch ensures that material is well mixed and shredded before it is thrown from the machine

Even Coverage
Whether spreading fresh, well rotted or semi-solid farmyard manure, poultry litter, compost or waste products, TITANs deliver an even, fine and wide spread pattern.

High Work Rates
Tall beaters deliver massive output for high work rates.

Quality Finish
Prior to finishing with a 2 pack paint system, all components are shot blasted to ensure that they are clean and provide the best possible keying surface for the paint. All seams are continuously welded or sealed to protect against corrosion.

CLICK THE LINK BELOW FOR A BROCHURE ON THE TEAGLE TITAN MUCK SPREADER

CLICK HERE TO DOWNLOAD TEAGLE TITAN BROCHURE

TITAN.jpg

TEAGLE PASTURE TOPPERS

Quality machines designed and manufactured using state-of-the art technology.
Teagle machines incorporate:


Rugged Construction - Built to last!
Attention to Detail - All the features you need for reliability & performance
Swinging Blades - For durability when the going gets tough
Shear Bolt Protection - protects against hidden object damage

AVAILABLE WITH CUTTING WIDTHS FROM 4ft TO 10ft


 

TEAGLETOPPER4.JPG


TOPPER 4

4' Cut 
Single rotor in-line machine

Spring Steel Blade Holdermounted directly on the gearbox output shaft

Height adjustment using skids

Low Power Rating ideal for compact tractors - 10kW upwards





topper5.jpg


TOPPER 5

5' Cut Single 
rotor in-line machine 

Spring Steel Blade Holder mounted directly on the gearbox output shaft

Height adjustment using skids

Lower Power Rating ideal for smaller tractors - 15 kW upward



topper510.jpg


TOPPER 510

5'-10" Cut 
Single rotor semi-offset machine gives a good finish with a minimum of wheelings 

Heavy Duty Fabricated Blade Holdermounted directly on the gearbox output shaft

Height adjustment using skids

Low Power Rating ideal for compact tractors - 19kW upwards


Topper6.jpg


TOPPER 6

6' Cut In-Line/Semi-offset machine - 
sliding headstock for use either in-line or semi-offset 

Overlapping Rotors for superb finish

Height adjustment using skids
 
 
 
 
 
 
 

topper8.jpg

TOPPER 8

8' Cut In-Line/Semi-offset machine - 
sliding headstock for use either in-line or semi-offset

Heavy Duty Rotors - Spring steel blade holders and heavy swinging blades rotating on hardened bushes.

Overlapping Rotors for superb finish

Height adjustment using skids



topper8.jpg

 

TOPPER 8 OFFSET
8' Cut Fully Offset Machine - 
no wheelmarks - perfect finish

Heavy Duty Rotors - Spring steel blade holders and heavy swinging blades rotating on hardened bushes.

Overlapping Timed Rotors for superb finish

Height adjustment using skids

Hydraulic Breakaway & Folding - all controlled from the tractor seat. No need to disconnect shafts.



topper9.jpg

TOPPER 9

9' Cut In-Line machine 


Front or Rear Mounting are standard features built into the machine.

Reversible PTO rotation just unbolt the centre gearbox and turn it upside down.

540 or 1000 rpm gearbox ratios are available - front mounting where the PTO runs at 1000 rpm is not a problem.

Shaft drive, incorporating rubber couplings, between the gearboxes means that the rotors can be timed and overlapped to eliminate any possible uncut strips.

                                                                                Heavy Duty Rotors Spring steel blade holders and heavy swinging blades rotating on hardened bushes. The PTO shaft incorporates a shear bolt for added protection.

                                                                                Good spread of cut material is ensured by bolt-on deflectors - easily reversed for front or rear mounting.

                                                                                Overlapping Rotors for superb finish

                                                                                Height Adjustment by means of skids


TEAGLE STRAW CHOPPERS & SILAGE FEEDERS

8080.jpg

mill.jpg

mill.jpg

4040.jpg

 

 

 

 

 

 

 

Tomahawk Box/Conveyor Trailed and Mounted Machines


For shredding and chopping round or rectangular bales of straw. Ideal for bedding large loose housing units - discharge distance up to 20m. Can feed baled or clamp silage. 


Tomahawk Drum Type Mounted Straw Shredders/Choppers & Silage Feeders


For round and rectangular bales of straw and silage. Long material, ideal for bedding loose housing & mulching applications. Feeds baled silage behind barriers, into ring feeders etc. Also suitable for roots & potatoes. 


Tomahawk Drum Type Mounted Straw Shredders/Choppers


For Shredding (chopping) round and rectangular bales of straw. Short chop length, ideal for cubicles, poultry houses etc… 


Tomahawk Drum Type Mounted Straw Mills

For shredding (chopping) round and rectangular bales of straw. Very short chop length, ideal for use with pumped slurry cubicle systems, poultry houses etc.




BROCHURE DOWNLOADS BELOW

DOWNLOAD Dual Chop Straw Shredder leaflet

DOWNLOAD Tomahawk Shredder leaflet

DOWNLOAD Straw Mill leaflet

 TEAGLE FERTILISER SPREADERS

compact8.jpg

Compact 8


Single rotor, hopper capacity 234 litres, bout width up to 8 metres

 

 

 

xt20.jpg

XT20



Single rotor, hopper capacity 660 litres, bout widths up to 12 metres


 

xt2448.jpg

XT24 & XT48

Twin rotors, hopper capacities 675 litres & 1350 litres, bout widths up to 12 metres.

 

XT24 & XT48 Band Spreader

Similar to agricultural models but specially designed to spread fertiliser in bands for orchards,
vineyards, soft fruit etc